Everyday Iron on is your go to for the basics using 50/50 and 100% cotton garments. Everyday Iron-On (formerly StrongBond) is a versatile heat-transfer vinyl (HTV) designed to personalize apparel, wood, and fabric goods. It is compatible with all cutting machines like Cricut, Brother, Roland, Camo and more.  It weeds fairly easy and is pretty durable to over 30+ washings. 

If we are short on single yards, we send two pieces with a little extra to compensate. These are end of roll remnants, may have a small flaw.

Commercial Press recommended but you can use a home iron. Set on cotton.

• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet and re-press for 5-10 seconds
• Peel carrier hot or warm  

Heat Press (recommended)

• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 310-320°F/160°C
• Use medium pressure for 20 seconds
• Pressure Firm
• Peel carrier hot or cold

  Strong Bond or Every Day HTV Applies to:

• • 100% Cotton
  • 100% Polyester
  • Cotton/Poly Blends
  • Lycra®/Spandex Blends
  • 100% Preshrunk Cotton